—、產品介紹 DESCRIPTION

污水廠生化污泥經投加本產品，利用絮凝劑分子破壞污泥分子間的間隙水的穩定性，利用常規鼓膜板框壓濾機使污泥含水率降低，污泥從脫水前的可流動狀到被脫水至有硬度的薄層泥餅，污泥體積減少，脫水后污泥燃燒熱值上升。

深度脫水后的污泥可資源化利用程度高，使用本產品進行污泥脫水可避免能源消耗，減少污泥增量，增加污泥品質，對于養殖場、食品廠污泥，可作為綠色有機肥。

After adding this product to the biochemical sludge of the sewage plant, the flocculant molecules are used to destroy the stability of the interstitial water between the sludge molecules, and the conventional tympanic plate and frame filter press is used to reduce the moisture content of the sludge, and the sludge can flow before dewatering The sludge volume is reduced and the calorific value of sludge combustion increases after dehydration.

The sludge after deep dehydration can be reused as a resource. The use of this product for sludge dehydration can avoid energy consumption, reduce sludge increase, and increase sludge quality. For sludge from farms and food factories, it can be used as a green organic fertilizer .

二、應用范圍 APPLICATION

1、市政污水處理廠的生化污泥脫水、減量；

2、工業園區污水廠的生化污泥的脫水、減量；

3、企業污水廠的生化污泥脫水、減量。

1. Dewatering and volume reduction of biochemical sludge in municipal sewage treatment plants;

2. Dewatering and volume reduction of biochemical sludge from sewage plants in industrial parks;

3. The dewatering and volume reduction of biochemical sludge in the corporate wastewater treatment plant.

三、質量指標 QUALITY

四、使用方法 INSTRUCTIONS

1、將產品稀釋成水溶液；

2、按照污泥絕干含量進行添加；

3、利用管道混合器或攪拌罐混勻后，直接進入板框壓濾機。

1. Dilute the product into an aqueous solution;

2. Add according to the absolute dry content of sludge;

3. After mixing with a pipeline mixer or a stirring tank, directly enter the plate and frame filter press.

五、實驗數據 EXPERIMENTAL

六、包裝規格 PACKAGING

25KG或1000KG 桶裝。

25KG or 1000KG drum.